47
DCM24B
DCM24R
DCM24S
TABLE OF CONTENTS
CONVECTION
MICROWAVE OVEN
MODELS
DCM24B
DCM24R
DCM24S
In the interest of user-safety the oven should be restored to its original condition and only parts identical to those specified
should be used.
WARNING TO SERVICE PERSONNEL: Microwave ovens contain circuitry capable of producing very high
voltage and current, contact with following parts may result in a severe, possibly fatal, electrical shock. (High
Voltage Capacitor, High Voltage Power Transformer, Magnetron, High Voltage Rectifier Assembly, High
Voltage Harness etc..)
Page
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICE TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ...................INSIDE FRONT COVER
BEFORE SERVICING ......................................................................................................INSIDE FRONT COVER
WARNING TO SERVICE PERSONNEL................................................................................................................ 1
MICROWAVE MEASUREMENT PROCEDURE ................................................................................................... 2
FOREWORD AND WARNING............................................................................................................................... 3
PRODUCT SPECIFICATIONS ..............................................................................................................................4
GENERAL INFORMATION................................................................................................................................... 4
OPERATION ..........................................................................................................................................................6
TROUBLESHOOTING GUIDE ............................................................................................................................12
TEST PROCEDURE ............................................................................................................................................14
TOUCH CONTROL PANEL .................................................................................................................................25
COMPONENT REPLACEMENT AND ADJUSTMENT PROCEDURE ................................................................ 31
PICTORIAL DIAGRAM ........................................................................................................................................ 38
CONTROL PANEL CIRCUIT ...............................................................................................................................39
PRINTED WIRING BOARD .................................................................................................................................40
PARTS LIST ........................................................................................................................................................41
PACKING AND ACCESSORIES .........................................................................................................................44
SERVICE MANUAL
DISTINCTIVE APPLIANCE CORPORATION
This document has been published to be
used for after sales service only.
The contents are subject to change without
notice.
To Next Page
Loading...
