5
48” (1219mm)
**
**
**
** Optional
1 1/16” (27mm) to cooking
surface (top of grates) from
top of trim
Finished Side
Panel
Gas Regulator Access,
Cover Removed
Range Electrical Access,
Cover Removed
E Electrical Connection
Hole in Bottom
Inlet
Back of Range
Planning the Installation
Product Dimensions
GAS - ELECTRICAL ACCESS DIMENSIONS
Model A B C D E*
ER36D
5 5/8”
(142.9mm)
18 3/8”
(466.7mm)
10 3/4”
(273.0mm)
13 11/16”
(347.7mm)
7/8”
(22.2mm)
ER48D
3 13/16”
(96.8mm)
18 11/16”
(474.7mm)
9 3/8”
(238.1mm)
13 3/4”
(349.3mm)
1 1/8”
(28.6mm)
* The diameter on models equipped for use in Canada is ¼” (6.4mm) larger
than those stated. Canadian units come from the factory pre-wired with
an appliance cord. When installing an appliance cord on models that are
not pre-wired, the hole size must be increased to 1 1/8” (1 3/8” for model
ER48D) by removing the conduit bracket inside the range electrical access
box.
All tolerances: ±1/16” (±1.6mm)
Width: ER36D - 35 7/8” (911mm)
ER48D - 47 7/8” (1216mm)
To Next Page
Loading...
Need help?
General