English20
Installation instructions
Installation instructions
Water pressure requirements
Water Supply
Water Supply
Reverse osmosis
system
30-150 psi
30-150 psi40-60psi
Refrigerator
Refrigerator
A cold water supply with water pressure
between 30 and 120 psi (207 and
827 kPa) is required to operate the water
dispenser and ice maker.
If you have questions about your water
pressure, call a licensed, qualied plumber.
Shut-Off
Water Valve
To Refrigerator
Main Water
Supply
Water Line
Reverse osmosis system in the water
supply
IMPORTANT: The pressure of the water
supply leaving a reverse osmosis system
going to the refrigerator’s water inlet
valve must be between 30 and 120 psi
(207 and 827 kPa).
The water pressure from the cold water
supply to the reverse osmosis system
needs to be a minimum of 40 to 60 psi
(276 to 414 kPa).
TBI_Dacor_Installation_DA68-03583A-03_EN.indd 20 2020-10-15 10:39:35
To Next Page
Loading...
Need help?
General
