English 23
Installation instructions
Connect power
Raise Grille Panel
Water Filter
Master Power Switch
• Connect refrigerator power cord plug
to a properly earthed receptacle. Set
the Master Power Switch to the “I” (ON)
position.
• Check to make sure power to
refrigerator is on by opening
refrigerator door to see if interior lights
are on.
CAUTION
After power has been established, turn
the Master Power Switch to the “O” (OFF)
position.
TBI_Dacor_Installation_DA68-03583A-03_EN.indd 23 2020-10-15 10:39:36
To Next Page
Loading...
Need help?
General
