0
-2
DS42-W00 Nov. 2007
DK752C/DK902C
SAFETY FIRSTGENERALENGINECLUTCHTRANSMISSION REAR AXLEBRAKEFRONT AXLESTEERINGHYDRAULICELECTRICCABINA/C SYSTEM
1. FOR SAFETY
Most accidents can be avoided if basic safety in-
structions and regulations are followed. Always fol-
low the safety regulations and avoid any dangerous
situation to prevent an accident.
You can be unexpectedly injured if inspecting or
servicing the tractor without full knowledge of it.
Read the service manual carefully before starting
servicing and follow the instructions for servicing,
maintenance and inspection to prevent any injury.
•
•
A. REMARK
Broaden your knowledge with additionally supplied
service information for optimal service.
•
B. IMPORTANT
This mark indicates emphasis on information which
can be confused when servicing. If this information
is not carefully read and observed, the tractor can-
not fully function or may be damaged.
•
ᴯᖿ⤇#╤ⴋ#$
T46W001A
T46W002A
T46W003A
C. CAUTION
ⱇ#⪣
This mark indicates potentially hazardous situation
which, if not observed, may result in serious injury.
•
D. WARNING
This mark indicates hazardous situation which, if
not observed, may result in death or injury.
•
T46W004A
T46W005A
1.1 ALERT SYMBOLS
In this manual, the following safety-alert symbols are used. Their meanings are as follows:
REMARK
CAUTION
WARNING
READ MANUAL!
SAFETY FIRST - FOR SAFETY
M39_AU.indb 섹션1:2M39_AU.indb 섹션1:2 2007-10-29 오후 8:22:172007-10-29 오후 8:22:17
To Next Page
Loading...
Need help?
General