SAFETY FIRSTGENERALENGINECLUTCHTRANSMISSION REAR AXLEBRAKEFRONT AXLESTEERINGHYDRAULICELECTRICCABINA/C SYSTEM
DS42-W00 Nov. 2007
0
-3
DK752C/DK902C
2. SAFETY TIPS
2.1 SAFETY GEAR
2.2.1 VENTILATING SYSTEM
The service should be performed in well-ventilated
area. If the engine should be started in an enclosed
place, the exhaust gas vent pipe should be installed.
2.2.2 SAFE WORKING PLACE
T46W006A
California Proposition 65 Warning
Inhaling exhaust gas can cause cancer or damage
the generative function leading to infertility.
•
WARNING
When working on the tractor, wear safety gloves, safety
shoes, ear plugs, safety goggles, safety helmet, work-
ing clothes, etc. appropriate for your working environ-
ment.
Never wear loose fi tting clothing or a tie which can be
caught by a rotating part. According to the statistics,
most accidents that occurred with rotating parts are
due to this inappropriate manner of wearing clothes.
2.2 WORK PLACE
T46W007A
T46W008A
The work should be done in a wide, level and safe
place to prevent slip and fall accident.
2.2.3 ILLUMINATION
The work place should be well illuminated. If working
in a dark place or under the tractor, use the work lamp.
The work lamp should be covered by the safety
cover. Light bulbs can cause fire if exposed to fuel
leaks.
2.2.4 SAFETY EQUIPMENT
Be sure to keep a fi rst aid kit and fi re extinguisher han-
dy at all times.
2.2.5 CLEAN WORKING AREA
Keep the working area clean before and during work. If
any oil or fuel is spilled, it should be cleaned up imme-
diately.
SAFETY FIRST - SAFETY TIPS
M39_AU.indb 섹션1:3M39_AU.indb 섹션1:3 2007-10-29 오후 8:22:232007-10-29 오후 8:22:23
To Next Page
Loading...
