EasyManua.ls Logo

DAELIM ROADWIN FI - CATALOG - Fuse Replacement

DAELIM ROADWIN FI - CATALOG
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Turn off the main switch to see if the fuse
is severed. If the fuse is severed, exchange
the fuse into a fuse with same capacity.
Fuse is installed in fuse box around the
battery.
To change a fuse, first take off fuse
cover. Then, remove the disconnected
fuse, and insert the reserved fuse with
same capacity.
If the fuse immediately becomes
severed after being changed with the new
one, check another problem of the
electric system. Contact to Daelim
service center.
FUSE REPLACEMENT
Do not use screw driver or other metal
parts to remove the fuse, as short circuit
can be occurred to cause damage to
electric system.
Do not usea fuse having a larger
voltage, as the wire can become
overheated and damaged.
When replacing any of the electrical
parts (lights and gauges), be sure to
replace them with the recommended
parts. Using different parts can lead to
the fuses burning out or damage to the
battery.
When washing the vehicle, take special
care not to allow to be splashed in the
area of the fuses.
FUSE HOLDER
Fuse A
30A
Charging, combi S/W,
regulator
Fuse B
15A
Winker relay, meter
lighting, horn, headlight
(LO/HI), front/rear stop
switch, taillight, fuel meter
Fuse C
15A
Ignition coil, Ecu,
O2 Sensor
Fuse D
15A
Ecu, Fuel pump relay,
Light relay
<DISASSEMBLY> <ASSEMBLY>

Related product manuals