5) After you connect the water socket of the tubing with
this device, connect the air socket by pushing it
until you hear a “click” sound.
* When this device is used without properly
connecting the tubing with this device, there is
a risk of oil leakage.
6) Check whether or not the pipe attached to the wrap
is rotated.
* When the pipe is rotated 90 degrees, the distilled
water will spill.
* The pipe is only in the reusable wrap.
(Disposable wrap do not have drain pipes.)
7) Check the direction of the power cord socket located
on the side of this device, and connect the cord.
Then, connect the power cord with the socket.
* Install this device in an environment where the
power cord can be easily connected and
disconnected.
23
To Next Page
Loading...
