7
If EEPROM (I703) has been changed ;
- Option data has to be changed and
- all alignment function has to be readjusted .
Option
Initial state C14M7F C14T7B C14M7E
C14M7B C14T7L
C14M7L
(Blank EEPROM) (FRANCE) ( U.K ) (OTHERS)
AV AV2 AV2 AV2 AV2
BAND 3 BAND 3 BAND 1 BAND 3 BAND
FRANCE OFF ON OFF OFF
ATS ON ON ON ON
The initial state of adjustment are as follows;
- V-Center, V-Slope V-Size, H-Center, R, G, B, AFT = Center ( 30/64 - 33/64 )
- S-Correction = 00/64
- AGC = 10/64
Service Remocon
To Next Page
Loading...
