- 72 -
¥
Injection Nozzle
Ajdust the injection opening pressure with an
adjustment screw.
Use a new gasket and dust cover when assembling
the nozzle.
¥
Fuel Injection Pipe
Surely tighten the delivery valve holder to a specified
torque.
It will be a reason for leakage from the control rack
and pipe if it is in excessive tightening.
¥
Oil Filter
¥
Fuel Pipe
Make sure not to use different joint bolt when
assembling it.
Torque joint bolts to specified torque.
¥
Intake Stake
EJM2163S
EJM2164S
EJM2165I
EJM2166S
EJM2167S
Torque 1.9
L
0.2 kg¥ m
Bolt Torque 3.1
L
0.2 kg¥ m
Torque 4.3 ~ 6.3 kg¥ m
¥
Adjustment of Injection Timing
See 1.5.10. Injection Timing.
Torque 2.6
L
0.5 kg¥ m
Dust cover
Nozzle gasket
Bolt
To Next Page
Loading...
