Daewoo D70S-2 - Engine Specifications

1.2. Engine Specifications
- 2 -
Engine Model
Items
Engine type Water cooled, 4 cycle, vertical in-line, overhead valve
Combustion chamber type Direct injection
Cylinder liner type Dry type
Timing gear system Gear drive type
Number of piston ring Compression ring 2, oil ring 1
No. of cylinder-bore
b
stroke (mm) 6-102
b
118
Total piston displacement (cc) 5,785
Compression ratio 17.5 : 1
Engine dimension(length
b
width
b
height) (mm) 1122
b
648
b
775
Engine weight(dry) (kg) 455
Fuel injection order 1-5-3-6-2-4
Fuel injection timing(B.T.D.C static) 18 û
Type of fuel used High speed diesel fuel (SAE No.2)
Fuel filter type Cartridge type
Injection pump type Bosch in-line A type
Governor type Mechanical governing (RSV type)
Injection nozzle type Multi-hole type
Fuel injection pressure (Kg/cm
2
) 220
Compression pressure (kg/cm
2
) 31 (at 200 RPM)
Low idle speed(R.P.M) 750 L 30
High idle speed(R.P.M) 2370 L 50
Intake and exhaust valve clearance(mm) 0.4 (at cold)
Rated Power 100ps / 2,200rpm
Max torque 35 kg ¥ m / 1,600rpm
Lubrication method Pressurized circulation
Oil pump type Gear type
Oil filter type Full-flow, cartridge
Lubricating oil capacity (
M
) 14.5
Oil cooler type Water cooled
Cooling method Pressurized forced circulation
Cooling water capacity(engine only) (
M
)12
Water pump Belt driven impeller type
Thermostat type Wax pallet type
Battery (V) 24
Alternator (V-A) 24-4.5
Starter (V-KW) 24-4.5
DB 58