www.daewoopower.bg
10
3. ASSEMBL
Assembly of the debris shield
It is extremely important that the disc drive's/support flange's guide engages correctly in the cutting equipment's
centre hole when assembling the cutting equipment. Cutting equipment assembled incorrectly can result in serious
and/or fatal personal injury.
WARNING!
Under no circumstances may the cutting equipment be used without an approved shield fitted.. If the wrong guard
or a defective shield is fitted this can cause serious personal injury.
Assemble debris shield as the fig. illustrated, note that the bolts should be tightened.
To Next Page
Loading...
Need help?
General
