Daewoo DBC430 User Manual

www.daewoopower.bg
5
www.daewoopower.bg
4
3
2. SAFETY INSTRUCTIONS
PERSONAL PROTECTIVE EQUIPMENT
IMPORTANT INFORMATION
A brush cutter, brush cutter or trimmer used incorrectly or carelessly can become a dangerous tool, that can cause
serious or fatal injury to the operator or others. It is extremely important that you read and understand the content of
this manual.
When using a brush cutter, brush cutter or trimmer, personal protective equipment approved by the appropriate
authorities must be used. Personal protective equipment does not eliminate the risk of accidents, however, it can
reduce the effects of an injury in the event of an accident. Ask your dealer for help when choosing protective equip-
ment.
WARNING!
Remove your hearing protection as soon as you stop the engine, so that you can hear any noises or warning signals.
EAR PROTECTION Ear protection offering sufficient dampening effect should be used.
EYE PROTECTION Blows from branches or objects thrown by the rotating cutting equipment can damage the
eyes.
GLOVES
Gloves should be worn when necessary, e.g., when assembling cutting equipment.
BOOTS
Use anti-slip and stable boots.
CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on shrubs and branche
Always wear heavy-duty long pants. Do not wear jewellery, shorts, sandals or go barefoot. Secure hair so it is above
shoulder level.
FIRST AID KIT
A first aid kit should be carried by operators of brush cutters, or trimmers.
THE MACHINE'S SAFETY EQUIPMENT
This section describes the machine's safety equipment, its function and how checks and maintenance are carried
out to ensure that it operates correctly. (See the chapter "What is what"to locate where this equipment is positioned
on your machine.)
WARNING!
Never use a machine with defective safety equipment. Follow the control, maintenance and service instructions
described in this section.
www.daewoopower.bg
5
4
1. Throttle trigger lock
The throttle trigger lock is designed to prevent the throttle from accidentally being engaged. When the trigger lock (
is pressed into the handle (= when you hold the handle) the throttle (B) is released. When the grip on the handle is
released the throttle and the throttle trigger lock return to their original positions. This takes place via two indepen-
dent return spring systems. This means that the throttle is automatically locked in its "idling" position.
2. Stop switch
The stop switch should be used to stop the engine.
3.Debris shield
This debris shield is intended to prevent objects from being thrown
towards the operator and to protect the operator from unintentionel contact with the cutting attachment.
WARNING!
Under no circumstances may the cutting equipment be used without an approved debris shield fitted.
CONTROL AND SERVICE OF THE MACHINE’S SAFETY EQUIPMENT
1. Throttle trigger lock
• Check that the throttle is locked in the "idling position" when the throttle trigger lock is in its original position.
• Press in the throttle trigger lock and make sure it returns to its original position when released.
• Ensure that the throttle and throttle trigger lock move easily and that their return spring systems function.
• See section "Start". Start the machine and apply full throttle. Release the throttle and check that the cutting equip-
ment stops and remains at a standstill. If the cutting equipment rotates with the throttle in the idling position then the
carburetor's idling setting must be checked.
• 2. Stop switch
• Start the engine and make sure that the engine stops when the stop switch is moved to the stop
3. Debris shield
• Check that the shield is undamaged and not cracked.
• Replace the shield if it has been exposed to impact or is cracked.
• Always use the prescribed blade and shield combination.
• 4. Blade and Trimmer head
• 1) Grass blades are intended for brush cutting.
• 2) The trimmer head is intended for trimming grass.
• 5. Locking nut
• A locking nut is used to secure some types of cutting equipment on the output shaft
6. Muffler
The muffler is designed to give the lowest possible noise level and to direct
the engine's exhaust fumes away from the operator. .
In countries that have a warm and dry climate the risk of fire is obvious.
We have therefore fitted certain mufflers with a spark arrestor screen. Make
sure that your muffler is fitted with this kind of screen.
It is extremely important that the instructions for checking, maintaining
and servicing the muffler are followed.

Daewoo DBC430 Specifications

General

Brand	Daewoo
Model	DBC430
Category	Brush Cutter
Language	English