EasyManuals Logo

Daewoo DBC430 User Manual

Daewoo DBC430
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
www.daewoopower.bg
19
www.daewoopower.bg
19
Weekly maintenance
1.Check the starter, the starter cord and the return spring.
2.Make sure that the vibration damping elements are not damaged.
3.Clean the outside of the spark plug. Remove and check the electrode gap. Adjust the gap to 0,6-0,7 mm or change
the spark plug.
4.Clean the cooling fins on the flywheel.
5.Clean or replace the muffler's spark arrestor screen (not on mufflers with a catalytic converter).
6.Clean the carburetor area.
7.Clean the cooling fins on the cylinder and check that the air intake in the starter unit is not blocked.
8.Check that the angle gear is 3/4 filled with grease. Fill if necessary using special grease.
Monthly maintenance
1.Clean the fuel tank using petrol.
2.Clean the carburetor and the area surrounding it.
3.Clean the fan and the area around it.
4.Check the fuel filter and the fuel pipe, replace if necessary.
5.Check all cables and connections.
6.Check the clutch, clutch springs and the clutch drum with regard to wear. Replace if necessary.
7.Change the spark plug.
18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daewoo DBC430 and is the answer not in the manual?

Daewoo DBC430 Specifications

General IconGeneral
BrandDaewoo
ModelDBC430
CategoryBrush Cutter
LanguageEnglish

Related product manuals