Daewoo DCR-9120 - Copying and Assembling Video

52
Timer Recordings
TIMER REVIEW - CHANGING AND ERASING
Call the player’s "SETUP",
choose "TIMER PROGRAM".
1
Select the programming to change or erase.
If you want to erase this programming press button [0].
If you wish to make changes:
Move to the position you want to change using the
[ œ/√ ] buttons.
Change the settings using the […/†] or [number]
buttons.
If all settings are ok, press [ œ or √ ], until you see
"OK: CONFIRM" in the bottom line.
Confirm changes with [OK]. Exit the menus.
2
TIMER PROGRAM
PR START END DATE
03 21:20 22:20 14/06
01 18:10 20:30 20/06
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
…/†:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR 03
START TIME 21:20
END TIME 22:20
START DATE 14/06(SAT)
TAPE SPEED SP
VPS/PDC ON
0 :ERASE
œ/√:CORRECT SETUP:END
* In case the unit operates in VCR or Radio mode, the timer recording function
can not be performed.