8
4. Remove the 3 screws and top mounting bracket.
5. Remove the dispenser from door assembly.
Removal and Replacement
1. Disconnect power.
2. Remove the filter assembly, upper and lower basket.
3. Remove the outer door.
4. Remove the 2 screws that connect the top panel 2 cover to the
dishwasher.
5. Take off the top panel and remove the 2 screws.
6. Remove the 2 screws and baseboard from the dishwasher.
7. Remove the 2 screws connected to left and right side baseboard.
Outside panel
Top panel
To Next Page
