2
2. CAUTIONS ON THE OPERATION
2-1. Installation
- Install the washer in the place easy of access to water, electrical power and drainage.
- Install the washer on a firm and flat floor.
- Be sure that the washing machine must be grounded with the external grounding wire(option)
or with the power cord and electric outlet of the house.
- Avoid installing the machine where it can be exposed to rain or direct ray of the sun, that may
cause trouble or discoloration. In case the machine has to be installed in such a place, provide a
shield to protect machine from rain or direct rays of the sun.
- In summer or other periods when there is a great difference between the water temperature and the
air temperature, drops of water may condense on the outside of the tub, and the floor might become
wet from dripping; be careful of this.
- Please disconnect the power cord plug after washing.
2-2. Grounding
- Connect the grounding wire(option) to a water faucet if the pipe is made of metal.
- Make sure that the power cord is unplugged during ground work.
- Be sure to wind grounding wire on a metal pipe like Fig1.
(Do not connect the grounding wire end to a gas tube.)
- For maximum security, attach the grounding wire to a copper plate or grounding rod and bury it at
least 20cm in the ground like Fig2.
Fig. 1 Fig. 2
To Next Page
Loading...
