Daewoo DWD-1211RT - Pressure Switch

27
4. ERROR DISPLAY
ERROR
SINGAL
ERROR CAUSE COUNTERPLAN
①inlet valve broken Change the Inlet-Valve
IE
WATER ②drain motor working during water supply Change the Drain Motor
INLET ERROR ③pressure switch disorderChange the Sensor Pressure
④PCB can not check water level Change the PCB
①drain motor out of order Change the Drain Motor
OE
DRAIN ②inlet valve working during drain Change the Inlet-Valve
ERROR ③pressure switch disorderChange the Sensor Pressure
④PCB can not check water level Change the PCB
UE UNBALANCE ERROR ①laundry unbalance rearrange the laundry
① door opened during processing Clode the Door
LE
DOOR
②LOCK S/W broken Change the LOCK SW
OPEN ERROR
③ PCB can not check door lockChange the PCB
①continuous water supplyChange the Inlet-Valve
E2 Overflow ②drain motor can not workChange the Drain Motor
③pressure switch disorderChange the Sensor Pressure
E3
FAN MOTOR
① fan motor cannot work Change the Fan-Motor
disorder
② PCB cannot control fan motor
The contact of the Connector or Change the PCB
E9
SENSOR PRESSURE
① abnormal water level Change the Sensor Pressure
ERROR
① huge noise re-installation
E5
HIGH VOLTAGE
②spining with jamming clothes between gasket rearrange the laundry
ERROR
③PCB broken Change the PCB
① huge noise re-installation
E6 EMG ERROR
②spining with jamming clothes between gasket rearrange the laundry
③motor broken Change the Motor
④PCB broken Change the PCB
E7 Direction Error
①move opposite direction
②motor Hall IC broken check the connector and change
E8 motor disorder
①connector problem The contact of the Connector
②abnormal loading conditioncheck the loading condition and change
H1
sensor temp.
①sensor temp broken Change the Sensor Temp.
dry disorder
②connector problem The contact of the Connector
H2
sensor temp.
①sensor temp. of washing broken Change the Sensor Temp.
wash disorder
②connector problem The contact of the Connector
H3
overheating
①fan motor cannot spin Change the Fan Motor
dry heater
②sensor temp. of dry brokenChange the Sensor Temp.
H4
overheating
①heater working with no water supply check water level
wash heater
②sensor temp. of wash brokenChange the Sensor Temp.
H6 abnormal of washing heater ①washing heater cannot workChange the Heater Wash
H7 abnormal of drying heater ①dry heater cannot work Change the Heater Dry
H8
abnormal of sensor temp.
①heater working with no water supply
check the water level and washing heater
of washing