To Next PageTo Next PageWhat does IE error mean on my Daewoo Washer?
To resolve the IE WATER INLET ERROR on your Daewoo washer, open the water tap if it is closed. If the filter of the valve inlet is clogged, clean it. If these steps do not work, you may need to change the valve inlet, the water level sensor, the drain motor, or the PCB ASS’Y.
What to do if the door on my Daewoo DWD-F1212 Washer won't open?
If your Daewoo washer door won't open, wait two minutes to give the electric locking mechanism time to release for safety reasons.
How to fix a Daewoo DWD-F1212 that won't drain?
If your Daewoo washer isn't draining water, or is draining slowly, inspect the drain hose for kinks or clogs and clean and straighten it. Also, check the drain filter for clogs and clean it.
What does lb error mean on my Daewoo DWD-F1212?
To resolve the lb IGBT ERROR on your Daewoo washer, you may need to change the PCB ASS’Y.
What does OE error mean on my Daewoo Washer?
To address the OE DRAIN ERROR on your Daewoo washer, start by cleaning and straightening the drain hose if it's kinked or clogged. If the issue persists, you may need to replace the drain motor, valve inlet, water level sensor, or PCB ASS’Y.
What does H2 error mean on my Daewoo DWD-F1212?
To address the H2 THERMISTOR WASH ERROR on your Daewoo washer, you may need to change the thermistor wash. Also, check the connector of the thermistor wash.
Why is my Daewoo DWD-F1212 leaking water?
If your Daewoo washer is leaking water, check the inlet and drain hoses for looseness at both the tap and washer connections. Tighten these connections if needed. Also, inspect your house drain pipes for clogs; unclog them yourself, or contact a plumber if necessary.
Why won't my Daewoo Washer spin?
If your Daewoo washer isn't spinning, make sure the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing Start/Pause before the washer begins to spin, as the door must lock first.
What does H4 error mean on my Daewoo DWD-F1212 Washer?
To fix the H4 THERMISTOR WASH OVERHEATING ERROR on your Daewoo washer, check the water level. Also, the thermistor wash may need to be replaced.
What to do if my Daewoo Washer leaks water?
If your Daewoo Washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer itself. Additionally, inspect your house drain pipes for clogs and unclog them. If the problem persists, it may be necessary to contact a plumber.
General| Loading type | Front Load |
|---|---|
| Capacity | 12 kg |
| Washing capacity | 12 kg |
| Spin Speed | 1200 RPM |
| Maximum spin speed | 1200 RPM |
| Energy Efficiency Class | A+++ |
| Energy Rating | A+++ |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Weight | 65 kg |
| Display Type | LED |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Display | Digital |
| Type | Front Load |
| Water Consumption | 50 L |
