To Next PageTo Next PageHow to reduce noise and vibration in my Daewoo DWD-M8021?
If your Daewoo washing machine is making serious noise and vibrating, it might be due to a few reasons. First, ensure that the transit bolts have been removed. Next, check if the washing machine is installed on an uneven floor and reinstall it on an even surface if needed. Finally, make sure the washing machine is leveled by adjusting the adjustable legs.
How to fix Daewoo DWD-M8021 when the program does not start?
If the Daewoo Washer program doesn't start, make sure the plug is tightly inserted. Also, check if there was a power failure, as the program should resume when power returns. Ensure the loading door is properly closed (you should hear a click), and that no laundry is trapped. Verify that you've selected a program and pressed the Start/Hold button.
What to do if my Daewoo DWD-M8021 Washer is not draining?
If your Daewoo washing machine isn't draining, inspect the drain hose for kinks or clogs; straighten and clean it if necessary. Additionally, the pump filter might be clogged, so ensure you clean the pump filter.
What to do if my Daewoo DWD-M8021 Washer program does not start?
If the program on your Daewoo Washer isn't starting, consider the following possible causes: * The plug may be loose or not plugged in. Insert the plug tightly. * There may be a power failure. An interrupted program will resume when the power returns. * The loading door might not be closed properly. Check if any laundry is trapped in the door and ensure the loading door is fully closed (you should hear a click). * A program may not have been selected. Select the desired program. * The Start/Hold button may not have been pressed. Press the Start/Hold button.
Why is water not entering my Daewoo washing machine?
If water isn't entering your Daewoo washing machine, check these possible causes: * The water tap may not be turned on. Turn the water tap on. * The inlet hose might be kinked or folded. Straighten the inlet hose. * The filter in the water inlet may be blocked. Clean the water inlet filter.
Why is my Daewoo DWD-M8021 Washer not spinning?
If your Daewoo Washer isn't spinning, there are a couple of potential reasons: * The amount of laundry may be too small. Add more laundry to balance the load and repeat the spin cycle. * The laundry might be unbalanced. Rearrange the laundry and repeat the spin cycle. Note that heavy clothing items like bathrobes can cause the washing machine to skip or stop the spin cycle.
Why is foam coming out of my Daewoo DWD-M8021 Washer detergent case?
If foam is coming out of the detergent case of your Daewoo washing machine, it's likely due to using too much detergent or an unsuitable detergent. Repeat the Rinse cycle to resolve this.
What does PFE error mean on my Daewoo DWD-M8021 Washer?
If your Daewoo Washer displays a PFE error, the drain pump filter may be clogged, so clean it. It could also mean the drain pump isn't working during the spin cycle, in which case you should change the drain pump. Using too much detergent can also cause this issue, so use the proper amount. Finally, ensure the drain hose is placed no higher than 1 meter above the floor.
What to do if foam comes out of the detergent case of my Daewoo DWD-M8021?
If foam is coming out of the detergent case of your Daewoo Washer, it's likely due to: * Using too much detergent or an unsuitable detergent. Repeat the Rinse cycle.
What does LE error mean on a Daewoo DWD-M8021 Washer?
If your Daewoo Washer displays 'LE', it could be that the Start/Hold button was pressed while the door was open; close the door. Alternatively, the switch door lock may be faulty, or the PCB ASS’Y isn't checking the door lock, requiring component changes.
General| Type | Front Load |
|---|---|
| Capacity | 8 kg |
| Spin Speed | 1200 RPM |
| Energy Rating | A+++ |
| Noise Level (Washing/Spinning) | 58 dB / 78 dB |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Display | LED |
| Programs | Cotton, Synthetics, Delicate, Wool, Quick, Rinse, Spin |
