Daewoo DWD-M8021 - Page 24

23
FUNCTIONS OF THE CONTROLLER
Sensing 20sec. ■
Water Supply 2min. ■
Pre Wash 13min.
8min. ■
Drain 1min. ■
B-Spin 1min. ■
Middle Spin 5min. ■
Sensing 20sec. ■■■■
Water Supply 2min. ■■■■■
60min.
Wash 1 35min.
(Heating) 30min.
15min.
10min.
73min.
Wash 2 23min.
15min.
Drain 1min. ■■■■■
B-Spin +
Remove 1min.
FOAM ■■■■■
Middle Spin 5min. ■■■■■
Water Supply 2min. ■■■■■
Rinse 1 3min. ■■■■■
Drain 1min. ■■■■■
B-Spin 1min. ■■■■■
Middle Spin 5min. ■■■■■
Water Supply 2min. ■■■■■
Rinse2 3min. ■■■■■
Drain 1min. ■■■■■
B-Spin 1min. ■■■■■
Middle Spin 5min. ■■■■■
Water Supply 2min. ■■■■■
Rinse3 3min. ■■■■■
Drain 1min. ■■■■■
B-Spin 1min. ■■■■■
7min.
Main Spin 5min.
3min.
Untangle 2min. ■■■■■
End 10sec. ■■■■■
Total Time 1:13 1:23 1:28 1:43 1:59
NOTE
P
R
E
W
A
S
H
W
A
S
H
R
I
N
S
E
S
P
I
N
END
Synthetic
COLD 30°C 40°C 60°C
PREWASH
60°C
Division Progress Time
• The washing time may vary by the amount of laundry, water pressure, water temperature and
other washing conditions. If an unbalanced load is detected or if suds removing program oper-
ates, the washing time maybe extended. (Maximum increasing time is about 1hour.)
• The Spin RPM of synthetic course is 800.