9
DESCRIPTIONS OF CONTROL PANEL
Power Switch
• Press this button to turn the power ON or OFF.
Temperature Selector (Optional)
• If your washer is connected to two water taps for cold water and hot water, you
can select them. Without operation, cold water would be selected
automatically.
Water Level Selector
• This button is used to select the water level you want.
Reservation Button
• If you want to reserve the finishing time of washing, use this button.
As this button is pressed, digit in display increases by 1 hour at one press.
• If current time is 8:00 am and you expect washing will be completed around
5:00 pm, press this nine times in order to display ‘9’.
Control Button
• If you want to change wash time, rinse times, spin time, you must press this
button after selecting each process by the process button.
Also, this button can be used spin only.
Program Button
• With this button, you can create new programs by combinations of process.
Course Selector
• This button is used to select the washing course according to the type of wash
loads.
• Either Wool or Suit course is adopted to your Washing Machine.
Start/Hold
• With this button, you can make your washer proceed your program, or stop
temporarily. And you can also release the temporary stop by pressing this.
To Next Page
Loading...
