10
Service Manual
Service Manual
6.2 Factory Option
Factor
Menu Remark
RESET FAC DEFAULT
Clear all user settings including channel information, but does not include the factory
white balance menu, LVDS Map, Backlight, Audio Level setting is generally
completed in the test machine to d o this. This process will need to wait for a few
WB
Manual white balance adjustment, back-end RGB OFFSET
(Cutoff) and GAIN (Drive) adjustments. Save the settings by
AUDIO SETTING
Input Volume: channel regulation by the Speaker of the group
sound output power.
Input Volume(Line Out) :Channel regulation by the sound of
each group of Line-Out output power.
Output Volume :Adjust the overall output power of the Speaker
Sound.
Vol Curve: Adjust the volume curve.
SETUP
VGA DDC: DDC Write.
INIT FLASH
Data area of the Flash format, clear all user settings including channel information,
menu and all the factory settings. This process will need to wait for a few seconds
automatically shut down.
Backli
ht Level
Backlight b rightness adjustment
To Next Page
Loading...
