11.1- ERF-..7A...EU, ERF-..7AR
NO FUNCTION CONTENTS
1 DISPLAY
1) CONTROL BUTTON
•
Temperature of Room R adjustment
‚
When you press this button, the temperature is controlled in sequence.
Ÿ
Display When VAC Mode was chosen : VAC LED lamp on
Ÿ
Display When 1step Mode was chosen : VAC~1 LED lamp on
Ÿ
Display When 2step Mode was chosen : 1~2 LED lamps on
Ÿ
Display When 3step Mode was chosen : 1~3 LED lamps on
Ÿ
Display When 4step Mode was chosen : 1~4 LED lamps on
Ÿ
Display When 5step Mode was chosen : 1~5 LED lamps on
Ÿ
Display When TURBO Mode was chosen : 1~TURBO LED lamps on
2) ARTIFICIAL INTELLIGENCE CONTROL BUTTON
•
When you press the ‘FUZZY’ button : VAC~4 LED lamps and FUZZY LED lamp
on.
‚
If you press it one more time (it means FUZZY is off.), you can adjust the
temperature of REF. by CONTROL button. If FUZZY is off, it turns to the last
mode of TEMP.
3) TEMP. BUTTON
•
If you press ‘TEMP’ button one time, it displays the temperature of the refrigerator
compartment. If you press ‘TEMP’ button two times continuously, it displays the
temperature of the freezer compartment.
(Unit : °C)
VAC 1 2 3
4
5 TURBO FUZZY
Room R
6 5 4 4
3
1 0 3
Room F
-17 -18 -19 -19 -20 -22 -23 -20
‚
Display led lamp will turn off within 5 seconds.
2
BUTTON
ADJUSTMENT
1) CONTROL BUTTON
•
Temperature Adjustment : If you press the CONTROL button, it follows
4 (MID, Default) → 5 → TURBO → VAC → 1 → 2 → 3 →4
Ÿ
If you don’t press the button again in 4 seconds, temperature will be set.
Daewoo Electronics 50