Daewoo FLR00046 - Outlet Hepa Filter Replacement; Positioning Outlet Hepa Filter; Securing Outlet Hepa Cover

17
Tornado Cylinder 700W Cyclonic Vacuum
Model No.: FLR00046
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
6. Right: Place the Outlet Hepa
Filter into position……
8. Right: Finally, Replace the Outlet Hepa Filter Cover (4). Place the lug at the
bottom of the cover in first then push the top in until the catch clicks into place:
6
7. Left: …..ensure the two lugs
(circled) at the top of the filter
are locate on the pins inside
the filter compartment.
7
8
Replacing the Outlet Hepa Filter
Lug
Catch