6. Pull Down Mode ( Test Mode )
1) How to start
- Push the LOCK button.
- Push the ICE button 5 times while keep pressing the REF.SET & FRZ.SET button.
2) How to control : Compressor, Freezer Fan, Refrigerator Fan and Compressor Cooling Fan is ON for 30 hours.
3) Display : Co display in Error Mode
4) Termination : After 30 hours or power reset.
7. System Off function
1) Purpose: Stop refrigerator operating without unplugging especially on holidays.
2) How to start : Pressing FRZ.SET and REF.SET button at the same time for 5 seconds will make the appliance turn off.
3) Under the 'off' mode Freezer and refrigerator temperature displays "- -".
Other LED lights go out and all the operation of your appliance halt.
4) Conversely pressing FRZ.SET and REF.SET button together for 5 seconds in order to switch back on.
8. Display Off function
FUNCTIONS
1) 5 minutes after no buttons or doors are operated by costomer, all the display LED except for;
WATER, ICE or LOCK ICE which is selected by the user
2) Under the LED off status it returns to normal display mode when customers operate buttons or doors.
9. Temperature indicator convert ( Celsius ↔ Fahrenheit )
1) Press the Lock button to enter locked mode.
2) Press the Light and Water button at the same time for 10 sec to swap temperature scale.
( Default setting is celsius )
17
To Next Page
Loading...
Need help?
General
