2. Bracket Geared Motor Assembly (Dispenser Models Only)
1) Disassembling Procedure
HOW TO CHECK EACH PART
No No
And unscrew 4 points.
Remove 2 screws. Check solenoid Motor.
14
Procedure Procedure
2
2) How to check the Hose Ice Maker Tube As.
Separate 6 pin connector of Geared Motor.
3
( Good ): 11.3 Ohm (+-10%)
(10.8 ~ 12.7 Ohm)
(Defective): Change the part.
Parts How to Check Remark
Checkthe resistance of
2 terminals with a Tester.
Geared Motor
31
To Next Page
Loading...
