G424 Service Manual General Information7
1EN0023
1EN0024
1EN0025
Rubber Parts
Do not stain timing belt and V-belt with oil or water.
Therefore, do not clean the pulley and sprocket with
detergent.
Oil and Grease
Before reassembly, apply specified oil to the rotating and
sliding parts.
Genuine Part
When the part is to be replaced, be sure to use genuine
part.
For selection of appropriate parts, refer to the Parts
Catalog.
1EN0022
Replacement Part
When oil seal, O-ring, packing and gasket have been
removed, be sure to replace them with new parts.
However, rocker cover gasket may be reused if it is not
damaged.
To Next Page
Loading...
Need help?
General
