Daewoo SCAN-200 - 1. Diagnostic device for system; SCAN-200 Keypad Overview

7
System Diagnostic Manual
1. Diagnositc device for system
There are two ways to check DTCs of the DL08 and DV11 engines for the purpose of
diagnosis: using the diagnosis device (SCAN-200) and checking the blinking number of
the engine CHECK lamp.
This manual mainly describes diagnosis procedures with the device (SCAN-200) for
faster and accurate diagnosis.
1
3
4
5
8
7
6
2
1. ENTER key (to move next step) 5. HELP key (to help screen)
2. Arrow keys (changes selected value or mode) 6. ESC key (to previous step)
3. PgUp and PgDn keys (to upper or lower page) 7. ENTER key (to move next step)
4. Select key (scrolls up and down to select) 8. PWR(power)
[ Figure. SCAN-200 keypad ]