TECHNICAL DATA
3-2
©
200515
Drive shafts, drive and chassis
0
ΛΦ45/55 series
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are to be
replaced, it is important - unless stated otherwise -
that these bolts and nuts are of exactly the same
length and property class as the removed ones.
ZF S5-42 gearbox
ZF 6S-850 gearbox
2
1
V3 00 395
Level check/filler
plug (2) 50 Nm
Drain plug (1) 50 Nm
2
1
V3 00 884
Level check/filler
plug (1) 50 Nm
Drain plug (2) 60 Nm
https://www.truck-manuals.net/
To Next Page
Loading...
