DAF LF45 - Check the Drive Shaft Play; Inspecting the Fifth Wheel

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-24
©
200515
Inspection and adjustment
5
ΛΦ45/55 series
3.29 CHECK THE DRIVE SHAFT PLAY
1. Check the universal joints (2) and
suspension bearing (3) for play and damage.
2. Check the sliding joint for axial and radial
play. The rubber dust cover (1) over the
sliding joint should be undamaged.
3. There must be no clearly perceptible play on
the universal joints, suspension bearing and
the sliding joint.
3.30 INSPECTING THE FIFTH WHEEL
1. Check the attachment of the fifth wheel.
2. Check the play of the closing gear of the fifth
wheel.
Note:
For maximum play values, consult the
manufacturer's instructions or the legal
requirements.
3. In the case of fifth wheels with a plastic
sliding plate (1), check for wear. The plastic
sliding plate (1) must not lie flush with the top
of the attachment bolts.
123
V3 00 379
V300372
1
2
https://www.truck-manuals.net/