©
200515 3-3
Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
5
3.5 CHECKING THE CAB FASTENING
1. Tilt the cab.
2. Check that all attachment bolts are in place.
3. Visually inspect the attachment of the cab to
the tilting mechanism.
4. Visually inspect the seals and condition of
the tilting mechanism.
Engine, cooling system and fuel system
3.6 CHECKING THE VIBRATION DAMPER (VULCANISED VERSION)
OF THE BE ENGINE
1. Check that the marks on the vibration
damper are aligned. If the marks are not in
line, the vibration damper must be replaced.
2. Check the rubber part for damage. If the
rubber part shows cracks or there are bits of
rubber missing, the vibration damper must
be replaced.
G0 00 199
https://www.truck-manuals.net/
To Next Page
Loading...
