EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-38
©
200515
Inspection and adjustment
5
ΛΦ45/55 series
3.45 CHECKING THE CLAMP OF THE DRIVE SHAFT UNIVERSAL JOINT
1. Retighten the attachment bolts (1) of the
clamps to the specified tightening torque,
see "Technical data".
Note:
The attachment bolts must not turn when
they are retightened.
Attachment bolts that turn when they are
retightened must be loosened and checked.
2. Tighten the loosened attachment bolts to the
specified torque. See "Technical data".
V3 00 377
1
https://www.truck-manuals.net/
To Next Page
Loading...
