ROLL +
CUT SAFETY SHEARING
MACHINES
SAFETY INSTRUCTIONS
The
cutting edges of the rotating round knife
at
the knife head
(6)
and of the lower
knife
(8)
must not
be touched because of the
great
danger of
injury.
DAHLE
safety shearing machines meet the
strict safety regulations of the
employer's
liability insurance
associations. This
safety,
however,
is also
guaranteed
if no technical modifications
are carried out on the unit.
To
ensure safety, only
genuine
DAHLE
spare
parts
may be used. When
ordering
spare
parts, please
indicate
the complete model number
on the bottom of the
shearing machine table.
1. DESCRIPTION
All DAHLE safety shearing machines
tested
for reliable
and faultless
operation.
are
individually
function
The
ROLL + CUT safety shearing machines are
suitable
for
cutting
paper,
film, foil and
soft
plastics.
You
can obtain
information
on
the
applicability to be cut from
your
dealeror DAHLE agent.
for
special material
Proper handling and use of suitable materials
guarantee
a
long
servicelife and a clean cut.
Model
Cutting length
Max.
cuttinq heiqht
Table
size
Weiqht
DAHLE
550
360 mm
2,0 mm
555 x
318
mm
2,7 kg
DAHLE
552
510
mm
2,0
mm 705
x
318
mm
3,5
kg
DAHLE
554 720
mm
2,0 mm
9'15x
318 mm
8,1 kg
DAHLE
556
960 mm
1,0
mm
1155x
318 mm
1 1,6
kg
DAHLE
558
1300 mm
0,7 mm
1495
x
318
mm
15,4 kg
DAHLE
750
360
mm
2,0 mm
555
x 318
mm
2,7 kg
The models
are equipped
as follows:
Round
knife
in enclosed
plastic
knife
head.
Guide
bar
(1)
with
rear
stop
(2) (in
models
550,
552 and
554 a
cm
grid
and various
DIN formats
(9)
are
additionally
provided
on the
shearing
machine
table).
A measuring
scale
(10)
in mm
and inches
increments
is
provided
on the
shearing
machine
table.
Facilityfor
wall
mounting
(14).
Two rockers
(1
1)
for mounting
the
unwinding
rod
(12,
roll-holder
accessory).
A roll
(13)
with
max. 100
mm
diameter
can
be inserted
here.
The
material
to
be cut is fixed
by means
of the
pressing
bar
(7)
and,
during
cutting,
additionally
by means
of the rubber
roller
integrated
in the
knife head
(6)
-7-
DAHLE 550, 552, 554, 556, 558, 750
..
ROLL + CUT SAFETY SHEARING MACHINES
SAFETY INSTRUCTIONS
• The
cutting
edges
of
the
rotating round knife at
the
knife head (6) and
of
the
lower
knife (8)
must
not
be
touched
because
of
the great
danger
of
injury.
• DAHLE safety shearing
machines
meet
the
strict
safety regulations
of
the
employer's
liability
insurance
associations.
This
safety,
however,
is
also
guaranteed
if
no
technical
modifications
are carried
out
on
the unit.
• To ensure safety,
only
genuine
DAHLE spare parts may be used. When
ordering
spare parts, please indicate the complete model
number
on
the
bottom
of
the
shearing machine table.
1.
DESCRIPTION
All DAHLE safety shearing machines are individually tested for reliable function and faultless operation.
The ROLL + CUT safety shearing machines are suitable for cutting paper, film, foil and soft plastics. You
can obtain information on the applicability for special material to
be
cut from your dealer or DAHLE agent.
Proper handling and use of suitable materials guarantee a long service life and a clean cut.
Model
Cutting length
Max. cutting height Table size Weight
DAHLE 550
360mm
2,Omm
555 x 318 mm 2,7 kg
DAHLE 552
510mm
2,Omm
1705
x
318
mm
3,5
kg
DAHLE 554 720 mm 2,Omm
915 x 318 mm
8,1
kg
DAHLE 556
960mm
1,Omm
1155 x 318 mm 11,6
kg
DAHLE 558
1300 mm
0,7mm
1495 x 318 mm
15,4
kg
DAHLE 750
360mm
2,Omm
555 x 318 mm 2,7
kg
The models are equipped as follows:
Round knife
in
enclosed plastic knife head.
Guide bar (1) with rear stop (2) (in models 550, 552 and 554 a
cm
grid and various DIN formats (9) are
additionally provided on the shearing machine table).
A measuring scale
(1
O)in mm and inches increments
is
provided
on
the shearing machine table.
Facility for wall mounting (14).
Two rockers (11) for mounting the unwinding rod (12, roll-holder accessory). A roll (13) with max. 100
mm diameter can be inserted here.
The material to be cut
is
fixed by means of the pressing bar (7) and, during cutting, additionally by means
of the rubber roller integrated
in
the knife head (6).
-7-
To Next Page
Loading...
Need help?
General
