• Mileage unit options (KM/H or MPH) • Voltage setting (36V/48V)
14. Normal function / Boost function – Use for normal and flat road surfaces.
15. Power assists function – Use for extra support with hills and/or strong
headwinds/ Use for strong support with very steep slopes.
16. Sleep Mode
• The display will switch to Sleep Mode automatically when the bike is not used
over 5 minutes.
• In the sleep mode, press the M key again to release it.
17. Error Code – The Error Code icon and Service icon will appear on the LCD when
malfunctions are detected. Please refer to the following error code numbers and
descriptions and check with your dealer for more information.
06
• After entering the setting, the
single mileage can be cleared
by pressing the DOWN key.
• Wheel diameter setting
To Next Page
Loading...
