User's Manual
5
4 Connecting to the Hub
Prior to connection with the hub, install the DMSS App on your phone. Make sure that you have
installed the latest version of the App. Interfaces and functions might vary with different added
devices, and the actual interface shall prevail. This manual takes iOS as an example.
●
Make sure that you have already created an account, and added hub to the application.
●
Make sure that the hub has stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub interface, and then tap to add the detector.
Step 2 Tap to scan the QR code at the bottom of the door detector, and then tap
Next
.
Step 3 Tap
Next
after the door detector has been found.
Step 4 Follow on-screen instructions and switch the door detector to on, and then tap
Next
.
Step 5 Wait for the pairing.
Step 6 Customize the name of the door detector and select the area, and then tap
Completed
.
To Next Page
Loading...
Need help?
General