User's Manual
117
Configuring Record Settings
You can record video manually or automatically and configure the recording settings to main stream
and sub stream respectively.
5.7.1 Enabling Record Control
Manual recording operation requires the user have the permission to access STORAGE settings.
Check to ensure the HDD installed in the Device has been formatted properly.
To enter the record control interface, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual > Record Control.
RECORD
Configure the settings for the record control parameters.
Table 5-31 Record control
Channel
Displays all the analog channels and the connected digital channels. You
can select a single channel or select
.
Record status
Auto: Automatically record according to the record type and
recording time as configured in the recording schedule.
: Keep general recording for 24 hours for the selected channel.
: Do not record.
To Next Page
Loading...
Need help?
General
