Controlling PTZ Cameras – Via Network - Setup
Suppose the IP address of the PTZ
camera is 10.15.7.3, port is 37777,
password of admin is “qwerty”.
Then we should add a “zone” in the
keyboard as follows:
ID: 1
Name: Door1
Type: SD
Link: NET
IPAddr: 10.15.7.3
Port: 37777
Rule: DH-2
PW: qwerty
Note: you can set any ID or Name, but should set other parts based
on the actual settings of the PTZ camera.
Network connection is only available for NKB1000.
Network
To Next Page
Loading...
