User’s Manual
164
HDCIV alarm
In the Channel list, select a channel or All.
Click .
Configure the settings for other parameters of the Alarm Box.
Click OK to save the settings.
Click Apply to complete the settings.
5.10.3 Alarm Output Settings
5.10.3.1 Configuring Alarm Output
When the Device activates alarms, the connected alarm device generates alarms in the way that you
can configure in this section. You can connect to the output port of the Device or connect wirelessly.
Auto: When an alarm event is triggered on the Device, the connected alarm device generates
alarms.
Manual: The alarm device is forced to keep generating alarms.
Stop: The alarm output function is not enabled.
Select Main Menu > ALARM > Alarm-out Port > Alarm Mode.
To Next Page
Loading...
Need help?
General
