Operation 7
Before administrators are created, anyone can enter the main menu and do settings. Once
administrators are created, only administrators can enter the main menu.
indicates that the network is disconnected.
indicates that the network is connected.
indicates the battery level and network connection condition. When you turn the
terminal on for the first time, the battery level is 25% (can last for about one hour). As time
goes by the battery life reduces.
Main menu
Press , and then the main menu will be displayed. See Figure 3-3.
Main menu Figure 3-3
After you have created administrators, you need to press first, and then you
can go to the main menu by the following methods:
Press your finger tip at the fingerprint sensor;
Enter the administrator’s user ID and password;
Swipe your card at the card reader.
You can select icon by the following two methods:
Press ∧/F2 or ∨/F3;
Press number keys.
Configure Network Parameters 3.3
On the main menu, select 5 Feature > Communication, and then you can configure IP
address, mask, gateway, MAC, and port. See Figure 3-4.
To Next Page
Loading...
