Operation 11
You can set duration for duty time in each shift. For example
08:30–12:00.
You can set duration for duty time in each shift. For example
13:30–17:00.
You can set overtime duration. For example 20:00–21:00.
There are two periods in which you may need to sign in and sign out, because there is an
interval between Duty T1 and Duty T2.
If you signed in for more than once, the system takes the earliest sign in records as
effective; if you signed out for more than once, the system only takes the latest sign out
records as effective.
In Overtime Session, there is no late/early leave time setup.
Import/Export shift
Once you have done shift settings on a terminal, you can export the settings through flash
drives and then import them to other terminals, thus you do not need to do settings repeatedly.
3.5.2 Schedule Setting
On the main menu, select 3 Shift > Schedule Setup, and then you can set schedule in each
month (only the current month and the next month) for users and set schedules in each week
for departments.
User Schedule
On the main menu, select Shift > Schedule Setting > User Schedule. Step 1
Press OK/F4. Step 2
Enter the user ID. Step 3
User name and department name will be displayed automatically.
Press OK/F4. Step 4
See Figure 3-9.
User schedule Figure 3-9
To Next Page
Loading...
