Operation 9
Adding new user (2) Figure 3-6
Do the following operations: Step 2
1) Enter user ID and name;
2) Record user’s fingerprints;
3) Let users set a password;
4) Register a card for the new user;
5) Select a department;
6) Select a schedule mode;
7) Select a user level.
A new user is added.
Maximum user ID length is 8 digits (the user ID length range can be 1–
99999999).
Maximum user name length is 16 letters.
Passwords can be numbers of 1–8 digits (Zero alone cannot be set as password
and cannot be the first number of a password.).
At most three fingerprints can be recorded for one user.
3.4.2 Add in Batches
Add users by swiping cards
Select 1 User > Add Cards in Batch, swipe cards at the card reader, and then user ID, and
card number will be automatically saved. You need to edit user names, add fingerprints and
passwords separately. See Figure 3-7.
To Next Page
Loading...
