Dahua ASA1222G-D - Add Users; Add One by One

Operation 8
Communication Figure 3-4
Table 3-1 Standby interface description
Parameter
Description
IP
Default value 192.168.1.108, you can configure it according to your needs.
Mask
Default value 255.255.255.0, you can configure it according to your needs.
Gateway
Default value 192.168.1.1, you can configure it according to your needs.
MAC
MAC address of the terminal and it cannot be modified.
Port
Port number, used to login the terminal on the SmartPSS.
Add Users 3.4
You can add users one by one or you can add users in batches.
3.4.1 Add One by One
On the main menu, select 1 User > Add New User. See Figure 3-5 and Figure 3-6. Step 1
Adding new user (1) Figure 3-5