Operation 10
Swipe cards to add users Figure 3-7
Add users through USB
You can export user information (including user ID, user name, password, card number,
department, user level and schedule mode) from one terminal to another terminal. The
exported information will be stored in an excel chart. You can edit information in the chart.
When imported to other terminals, user information with the same User ID will be overwritten.
On the main menu, select 4 USB > Import User Info. Step 1
The prompt New info will cover the before one will be displayed.
Press Confirm-OK. Step 2
And then user information will be imported.
When storage space of the USB is less than 1M, files can be exported but might be
corrupted.
Shift 3.5
You can set shift periods. There are 24 shifts in total.
3.5.1 Shift Setting
On the main menu, select 3 Shift > Shift Setting > Shift. You can set 24 shifts at most.
See Figure 3-8.
Shift setting Figure 3-8
Table 3-2 Shift setting description
To Next Page
Loading...
