Dahua DH-HCVR5424L-S2 - Page 153

HDCVI Standalone DVR User’s Manual
143
 Delete: Click it to remove specified item.
 Edit: Click it to edit start address and end address. See Figure 4-90. System can
check the IP address validity after the edit operation and implement IPv6 optimization.
 Default: Click it to restore default setup. In this case, the trusted sites and blocked
sites are both null.
Note:
 If you enabled trusted sites, only the IP in the trusted sites list can access the device.
 If you enabled blocked sites, the IP in the blocked sites can not access the device.
 System supports add MAC address.
Figure 4-89
Figure 4-90
4.11.2.7.2 Sync time right
From main menu->Setting->Network->IP Filter->Sync time right, you can go to the
following interface. See Figure 4-91.
It is to set sync time right. If you enable the white list function, only the IP in the list can
sync the DVR time.