HDCVI Standalone DVR User’s Manual
Figure 4-109
4.11.3.1.4 Analysis
System can trigger an alarm when the stripe, noise, color cast, out of focus, over
exposure event occurred. See Figure 4-110.
Please refer to chapter 4.11.3.1.1 motion detection for detailed information.
Figure 4-110
This function allows you to be informed when video is blurry, over exposure or color
cast occurs. You can enable alarm output channel and then enable show message
function. Click the Rule Set button, or move the cursor to Set button and then click the
To Next Page
Loading...
