HDCVI Standalone DVR User’s Manual
snapshot.
4.11.4.1.2.4 Image FTP
In the main menu, from Setting->Network->FTP, you can set FTP server information.
Please enable FTP function and then click save button. See Figure 4-137.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.11.4.1.2.1) or activation snapshot
(Chapter 4.11.4.1.2.2) first, now system can upload the image file to the FTP server.
Figure 4-137
4.11.4.2 HDD Manager
Here is for you to view and implement hard disk management. See Figure 4-138.
You can see current HDD type, status, capacity and etc. The operation includes format
HDD, and change HDD property (read and write/read-only/redundancy).
Please input the
corresponding information
here, if you just upload the
image FTP.
To Next Page
Loading...
