HDCVI Standalone DVR User’s Manual
5.8.2.10 UPnP
It allows you to establish the mapping relationship between the LAN and the public
network.
Here you can also add, modify or remove UPnP item. See Figure 5-40.
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the
“Add/Remove Windows Components” and then select the “Network Services” from
the Windows Components Wizard.
Click the Details button and then check the “Internet Gateway Device Discovery and
Control client” and “UPnP User Interface”. Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the DVR
can auto detect it via the “My Network Places”
Figure 5-40
5.8.2.11 SNMP
The SNMP interface is shown as in Figure 5-41.
The SNMP allows the communication between the network management work station
software and the proxy of the managed device. It is reserved for the 3
rd
party to develop.
Figure 5-41
Please refer to the following sheet for detailed information.
To Next Page
Loading...
