HDCVI Standalone DVR User’s Manual
Figure 5-85
Please refer to the following sheet for detailed information.
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
record setup.
Check the corresponding All button, you can enable or disable all
channels record.
5.8.4.4 Advanced
5.8.4.4.1 HDD
Here is for you to set HDD group. See Figure 5-86.
To Next Page
Loading...
