HDCVI Standalone DVR User’s Manual
There are six periods in one day. If you check Holiday box, current
channel shall record as your holiday setup here.
Copy function allows you to copy one channel setup to another. After
setting in channel, click Copy button, you can go to interface Figure
5-82. You can see current channel name is grey such as channel 1.
Now you can select the channel you want to paste such as channel
5/6/7. If you want to save current setup of channel 1 to all channels,
you can click the first box “ALL”. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy
function succeeded.
5.8.4.2 Local Storage
The local interface is shown as in Figure 5-83. Here you can see HDD information. You
can also operate the read-only, read-write, redundancy (if there are more than on HDD)
and format operation.
Figure 5-83
5.8.4.2.1 HDD Setting
Here is for you to set HDD group. See Figure 5-84.
Figure 5-84
5.8.4.3 Manual Record
The interface is shown as in Figure 5-85.
To Next Page
Loading...
